Star Micronics TSP400Z Manual de usuario descargar pdf (Pagina 8)

– 5 –

ENGLISH

4. Connecting the interface cable

4-1. Serial interface

Follow the procedures below to connect the interface cable:

Fig. 4-1

1 Switch off the power to the printer

and computer.

2 Insert the interface cable in the con-

nector. (Be sure that the cable is

oriented correctly before inserting

it.)

3 Fasten the right and left screws to

fix them in place on the connector.

4 Connect the other end of the inter-

face cable to your computer.

NOTE: The data transfer conditions between the computer and the printer must

be made compatible with the DIP switch settings on the printer. (Refer

to “APPENDIX”.)

4-2. Parallel interface

1 Switch off the power to the printer

and computer.

2 Insert the interface cable in the con-

nector. (Be sure that the cable is

oriented correctly before inserting

it.)

3 Fasten the connector clasps.

4 Connect the other end of the inter-

face cable to your computer.

Fig. 4-2

Interface cable

Interface connector

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 79 80

Comentarios a estos manuales

Sin comentarios