Star Micronics SG-10 Manual de usuario descargar pdf (Pagina 14)

and guide, which are designed expressly to guide continuous paper

(sprocket-feed) through the printer.

n Attaching the paper separator and paper guide

First, identify the paper separator (the large metal rack), shown

in Figure l-6. Insert one protruding end into the hole shown in

the diagram, then gently bend the other protruding end until it

snaps into the opposite hole. Follow the same procedure with

the smaller metal rack, which is the paper guide.

er separator

Paper guide

Figure 1-6. Attach the paper separator and paper guide.

Important news: If you get these in upside down, they won’t

work. So take another sharp look at Figure l-6 before we pass

on to the final act-installing the ink ribbon.

n Installing the ribbon

Telling you how to set the ribbon is like writing a set of in-

structions on how to tie your shoelaces. It takes a lot longer to

describe it than it does to do it! So, you’ll be smart to study the

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 127 128

Sin comentarios

Star Micronics SG-10 Manual de usuario Pagina 14