Star Micronics SM-T400i-DB50 Manual descargar pdf (Pagina 19)

- 12 -

* Example:

When you want to change the settings of the printer mode as shown below,

<Before> Bluetooth/9600BPS/8DATABIT/NOPARITY/1STOPBIT/DENSITYLOW/

 LOWQUALITY/MARKNOUSE/SENSORLOW/PWDN1minSleep

<After> Bluetooth(iOS)/9600BPS/7DDATABIT/EVENPARITY/1STOPBIT/DENSITYLOW/

 HIGHQUALITY/MARKNOUSE/SENSORHIGH/PWDN1minSleep

Press and hold the POWER & FEED buttons for 3 seconds. After the ERROR LED ashes ve times,

you can congure the settings.

Press the POWER button once and the connection mode will be changed to “Bluetooth Mode

(iOS)”.

Display: Bluetooth(iAP)

Bluetooth Mode

Press the FEED button once and then you can change the baud rate setting.

When the baud rate does not need to be changed, press the FEED button once again and you can

change the data bit setting. Press the POWER button once and the data bit will change to “7 bit”.

Display: 8 DATA BIT

7 DATA BIT

Press the FEED button once and then you can change the baud rate setting

 PressthePOWERbuttontwiceandtheparitybitwillbechangedto“EVENPARITY”.

 Display: NOPARITY

ODDPARITY

EVENPARITY

ress the FEED button once and then you can change the stop bit setting

When the stop bit does not need to be changed, press the FEED button once again and you can

change the print density setting.

When the print density does not need to be changed, press the FEED button once again and you

can change the print quality setting.

 Display: LOWQUALITYgHIGHQUALITY

5. After you have congured all of the settings, press and release FEED and MODE at the same time.

The new settings will be printed.

If the settings were not congured correctly, follow the above procedure to congure the settings

again.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Sin comentarios

Star Micronics SM-T400i-DB50 Manual Pagina 19