Star Micronics SM-T400i-DB50 Manual Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 31
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
- 16 -
3.1.1 Button
1) POWER Button :
1
Pressing and holding the POWER button for 3 seconds or more will turn the power on or o.
2
Pressing both the POWER and FEED buttons simultaneously will cause the ERROR lamp to ash 5
times and put the printer into Memory Switch Setting mode. The POWER button can now be used
to change Printer MODE status visible on the LCD screen for fast conguration.
(Refer to 2.4 Memory Switch Settings for details about mode conversion)
2) FEED Button :
When the printer is on, paper can be fed manually by pressing and holding theFEED
button for more than one second.
3.1.2 Panel Lamp
1) POWER (Green) : Printer is ON and ready to receive data.
2) ERROR (Red) : Indicates an error has occurred. (Ex: Paper Out, Cover Open, etc)
3.1.3 LCD
3. Printer Features
3.1 Control Panel
LCD will display most of the printer status.
1) The 128 × 32 dot display shows alphanumeric characters.
2) Content
Mode/Status:Indicatesthecurrentlyspeciedprintermodeorerrorstatus.
Data communication status :
...
The image shown on the left indicates that the data com-
munication status is good.
Remaining battery power :
...
There is sucient remaining battery power.
...
The remaining battery power is low. Please charge the bat-
tery pack. *)
Flashing
...
The remaining battery power is extremely low.
Stop using the printer immediately, and charge the battery
pack. *)
Note*): If you continue printing at the low remaining battery power
status, the printer cannot feed paper properly and may print
with condensed (narrow) line spacing.
Bluetooth connection status :
...
The mark on the left indicates that there is a Bluetooth con-
nection.
When there is no Bluetooth connection, the mark is not
displayed.
Bluetooth Mode
Mode Status
Remaining battery power
Data Communication Status
Bluetooth Connection Status
FEED Button
POWER Button
ERROR Lamp
POWER Lamp
LCD
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Comentarios a estos manuales

Sin comentarios