Star Micronics TSP654II-WebPRNT-2 Manual descargar pdf (Pagina 17)

ERROR

FEED

POWER

TSP650

3-7-2. Pairing using PIN code

Enter the following information in the master device if it does not support SSP, or when otherwise necessary.

PIN: 1234 (default)

Device name: Star Micronics (default)

It is recommended that you change the PIN code for greater security.

For details regard changing the PIN code, please see the “Soware Manual -Star Bluetooth Utility- ”.

3-7-3. Auto Connection Function (iOS only)

Each time the wireless connection is disconnected while communicating with upper-level iOS devices including iPad over

Bluetooth, it is necessary to move back to the Bluetooth setting screen in the upper-level iOS device and tap the desired

printer name again to build a connection. is is an iOS specication.

In order to save this labor, this printer is equipped with the Auto Connection function that automatically requests a con-

nection from an upper-level iOS device that was connected to the printer last time.

e default setting of this function may dier according to the printer model you are using.

Conrm the default settings for your printer, as well as the use examples for ON/OFF settings, and then make the settings

to match your purpose.

You can also check the current ON/OFF setting by performing self-printing.

< Conrmation procedure by self-printing >

(1) While the printer cover is closed, hold down the FEED button

on the operation panel, and then turn on the power switch.

(2) Self-printing starts, and the settings for F/W Version, Dip-

Switch, Memory Switch, and so on are printed.

(3) If you keep holding down the FEED button aer self-printing

is complete, the current ON/OFF settings are printed aer the

interface information.

Caution: If "Auto Connection function" is set to ON when using devices other than iOS, a Bluetooth communi-

cation with the printer may fail. To use devices other than iOS, such as the Android/Windows devices,

make sure you turn o the "Auto Connection" function before using the printer.

For information on how to set up this function, see "3-7-4. Setting up Auto Connection".

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Sin comentarios

Star Micronics TSP654II-WebPRNT-2 Manual Pagina 17