Star Micronics SM-S220i-DB40 Manual descargar pdf (Pagina 25)

- 18 -

3.2 Self Test

Youcanuseaselftesttochecktheprinter’ssettings.

Before you start the self test, make sure that roll paper has been properly loaded into the printer.

3.2.1 Self Test Procedure

1) Turn on the power while holding down FEED.

2) The printer will print the current printer status, including the rmware version, communication

mode, and print settings.

3) The self test will nish automatically. The printer will be ready to receive data after the self test

nishes.

3.2.2 Printing the Bluetooth Device Name and MAC Address

1) Follow the procedure in section 3.2.1 to perform a self test.

2) Before the self test nishes, press and hold FEED and MODE at the same time.

3) The printer will print the Bluetooth device name and MAC address, and the self test will nish

automatically.

The printer will be ready to receive data after the self test nishes.

Self test information

Bluetooth device name and MAC address

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31

Sin comentarios

Star Micronics SM-S220i-DB40 Manual Pagina 25