Star Micronics SM-S220i-DB40 Manual descargar pdf (Pagina 28)

- 21 -

5. General Specications

Item Specications

Printing method Direct line thermal printing

Characters per line Maximum 42 cpl

Character size

Alphanumeric characters: 12 X 24 dots, 9 X 24 dots, and 9 X 17 dots

Japanese characters: 24 X 24 dots

Character types

Alphanumeric characters, expanded graphic characters, JIS Level-1 Kanji Set, JIS

Level-2 Kanji Set, and special characters

Dot density 203dpi(8dots/mm)

Printing width 48 mm (384 dots)

Print speed 80mm/s(max)

Interface

Bluetooth

Bluetooth Spec. BluetoothVer2.1+EDR/Class2(10m)

Frequency Range 2.4GHz ISM BAND (2402~2480 MHz)

RF Power Below 10 dBm

Modulation method GFSK

Oscillation method PLL

SSP Incompatible

RS-232C × 2

Roll paper Thermal roll paper (57.5 ± 0.5 mm wide with a diameter of Ф40 mm)

Barcode

1D: JAN, EAN, UPC, ITF, Code39, Code93, Code128, CODABAR(NW-7)

2D: PDF417, QR Code, DATA Matrix

Communication packet size Maximum 8K byte

Emulation ESC/POS

LCD 128 × 32 dots (LED backlight)

Battery pack Lithiumion7.4VDC(rechargeable),1130mAh

Battery operating time

Approximately 8 hours (normal mode)

Approximately 45 minutes (continuous printing)

Battery charger

Input: 100to250VAC,50to60Hz

Output:8.4VDC/0.8A,Timerequiredforfullcharge:4h

Environmental

Requirements

Temperature *1 )

C to 50

C (for operation)

-20

C to 60

C (for storage)

Humidity

30% to 80% (for operation)

10% to 90% (for storage)

Print head life Approximately 50 km

Drop resistance 1.2 m. Please note that this value was obtained under testing conditions stipulated

*1) When the temperature of the operating environment is 10°C or less, in the memory switch settings, set the

print density to high.

1 2 ... 23 24 25 26 27 28 29 30 31

Comentarios a estos manuales

Sin comentarios

Star Micronics SM-S220i-DB40 Manual Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Pos / Impresoras Móviles Star Micronics SM-S220i-DB40